IBC talpos šildytuvas 2500W 230V
Description
The immersion heating set is used in open tanks, where it is not possible to use a screw-in heater.
In 1000l Mauser type pallet tanks, the heater is mounted on the edge of the thread with a handle designed for this purpose. Additionally, the heater rests on the entire threaded collar, stabilizing the element. In other types of tanks, the heater can be hung on the edge of the tank/tub. The significant non-heating zone, i.e. 550mm, allows for use at different water levels. It should be noted that the water surface level should always be above the heating zone.
The standard power of the heater is 2500W - other powers are available on request.
Possible temperature setting from -50 to 150 degrees Celsius with hysteresis adjustment function.
IP 67 tightness class
Cable length: 2mb
NOTE: The heater must be completely immersed in water.
| Length A | Length of metal part: 850mm |
| Length B | Heating zone: 300mm |
| Tube diameter | Ø8,5mm |
| Tube material | acid-resistant steel / stainless steel |
| Power output | cable with plug |
| Working environment (heated medium) | Water |
| Purpose/application | IBC containers, tanks, |
| Power (W) | 2500W |
| Tension | 230V |